InfraRecorder version 0.53.0.0 (x64)
Started: pátek, srpna 31 2018 04:44:09.
Versions: MSW = 6.1, IE = 6.1, CC = 6.10.
FileSystemWriter::write
  sector offset: 0.
  Allocated directory entries 46 sectors.
CCore::BurnCompilation
  [10,0,0] PIONEER BD-RW   BDR-209D 1.10
  Eject = 0, Simulate = 0, BUP = 1, Pad tracks = 1, Close = 1, Overburn = 0, Swab = 0, Ignore size = 0, Immed = 0, Audio master = 1, Forcespeed = 0, VariRec (enabled) = 0, VariRec (value) = 0, Data bytes 4234164224.
FileSystemWriter::write
FileSystemWriter::write
  sector offset: 0.
   > scsidev: '10,0,0'
   > scsibus: 10 target: 0 lun: 0
   > SCSI buffer size: 64512
   > /cygdrive/e/Zalohy/BURN/ir053_portable_x64/cdrtools/cdrecord: Warning: The DMA speed test has been skipped.
   > Cdrecord-ProDVD-ProBD-Clone 2.01.01a61 (i686-pc-cygwin) Copyright (C) 1995-2009 Jörg Schilling
   > TOC Type: 1 = CD-ROM
   > Using libscg version 'schily-0.9'.
   > Driveropts: 'burnfree'
   > atapi: -1
   > Device type    : Removable CD-ROM
   > Version        : 0
   > Response Format: 2
   > Capabilities   : 
   > Vendor_info    : 'PIONEER '
   > Identifikation : 'BD-RW   BDR-209D'
   > Revision       : '1.10'
   > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
   > Current: DVD-R sequential recording
   > Profile: BD-RE 
   > Profile: BD-R random recording 
   > Profile: BD-R sequential recording 
   > Profile: BD-ROM 
   > Profile: DVD+R/DL 
   > Profile: DVD+RW 
   > Profile: DVD+R 
   > Profile: DVD-R/DL layer jump recording 
   > Profile: DVD-R/DL sequential recording 
   > Profile: DVD-RW restricted overwrite 
   > Profile: DVD-RW sequential recording 
   > Profile: DVD-R sequential recording (current)
   > Profile: Removable Disk 
   > Profile: DVD-ROM 
   > Profile: CD-RW 
   > Profile: CD-R 
   > Profile: CD-ROM 
   > Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
   > Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE 
   > Supported modes: PACKET SAO LAYER_JUMP
   > Drive buf size : 1146880 = 1120 KB
   > FIFO size      : 4194304 = 4096 KB
   > Track 01: data  4038 MB         padsize:   30 KB
   > Total size:     4038 MB = 2067478 sectors
   > Current Secsize: 2048
   > Total power on  hours: 1043142
   > Blocks total: 2297888 Blocks current: 2297888 Blocks remaining: 230410
   > Reducing transfer size from 64512 to 32768 bytes.
  Allocated directory entries 46 sectors.
   > Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session.
   > Last chance to quit, starting real write in 5 seconds
   >  Operation starts.
   > Waiting for reader process to fill input buffer ... input buffer ready.
   > BURN-Free is ON.
   > Starting new track at sector: 0
   > 1x
   > Track 01: writing  30 KB of pad data
   > Track 01: Total bytes read/written: 4234164224/4234194944 (2067478 sectors)
   > Writing  time:  799
   > 911s
   > Average write speed   3
   > 8x
   > Min drive buffer fill was 94
   > Fixating
   > Fixating time:   34
   > 320s
   > /cygdrive/e/Zalohy/BURN/ir053_portable_x64/cdrtools/cdrecord: fifo had 129217 puts and 129217 gets
   > /cygdrive/e/Zalohy/BURN/ir053_portable_x64/cdrtools/cdrecord: fifo was 0 times empty and 37294 times full, min fill was 67
CCore::ProcessEnded
  Process exited with code: 0.
CCore::EjectDisc
  [10,0,0] PIONEER BD-RW   BDR-209D 1.10
  Command line to run: "E:\Zalohy\BURN\ir053_portable_x64\cdrtools\cdrecord.exe" -eject dev=10,0,0
   > scsidev: '10,0,0'
   > scsibus: 10 target: 0 lun: 0
   > /cygdrive/e/Zalohy/BURN/ir053_portable_x64/cdrtools/cdrecord: Warning: The DMA speed test has been skipped
   > Cdrecord-ProDVD-ProBD-Clone 2
   > 01
   > 01a61 (i686-pc-cygwin) Copyright (C) 1995-2009 Jörg Schilling
   > Using libscg version 'schily-0
   > 9'
   > Device type    : Removable CD-ROM
   > Version        : 0
   > Response Format: 2
   > Capabilities   : 
   > Vendor_info    : 'PIONEER '
   > Identifikation : 'BD-RW   BDR-209D'
   > Revision       : '1
   > 10'
   > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM
   > Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd)
   > Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE 
   > Supported modes: PACKET SAO LAYER_JUMP
CCore::ProcessEnded
  Process exited with code: 0.