InfraRecorder version 0.53.0.0 (x64)
Started: neděle, července 22 2018 09:00:54.
Versions: MSW = 6.1, IE = 6.1, CC = 6.10.

InfraRecorder version 0.53.0.0 (x64)
Started: neděle, července 22 2018 09:01:18.
Versions: MSW = 6.1, IE = 6.1, CC = 6.10.
CCore2Info::GetTotalDiscCapacity
  Current profile: 0x0041.
  Capacity list length: 40 bytes.
FileSystemWriter::write
  sector offset: 0.
  Allocated directory entries 2 sectors.
CCore::BurnTracks
  [10,0,0] PIONEER BD-RW   BDR-209D 1.10
  File = H:\Temp\Inf9983.tmp.
  Eject = 0, Simulate = 0, BUP = 1, Pad tracks = 1, Close = 1, Method = 0, Overburn = 0, Swab = 0, Ignore size = 0, Immed = 0, Audio master = 1, Forcespeed = 0, VariRec (enabled) = 0, VariRec (value) = 0, Mode = 0.
  Command line to run: "E:\Zalohy\BURN\ir053_portable_x64\cdrtools\cdrecord.exe" -v dev=10,0,0 gracetime=5 -sao driveropts=burnfree -pad speed=2 -data "/cygdrive/H/Temp/Inf9983.tmp"
   > scsidev: '10,0,0'
   > scsibus: 10 target: 0 lun: 0
   > SCSI buffer size: 64512
   > /cygdrive/e/Zalohy/BURN/ir053_portable_x64/cdrtools/cdrecord: Warning: The DMA speed test has been skipped.
   > Cdrecord-ProDVD-ProBD-Clone 2.01.01a61 (i686-pc-cygwin) Copyright (C) 1995-2009 Jörg Schilling
   > TOC Type: 1 = CD-ROM
   > Using libscg version 'schily-0.9'.
   > Driveropts: 'burnfree'
   > atapi: -1
   > Device type    : Removable CD-ROM
   > Version        : 0
   > Response Format: 2
   > Capabilities   : 
   > Vendor_info    : 'PIONEER '
   > Identifikation : 'BD-RW   BDR-209D'
   > Revision       : '1.10'
   > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
   > Current: BD-R sequential recording
   > Profile: BD-RE 
   > Profile: BD-R random recording 
   > Profile: BD-R sequential recording (current)
   > Profile: BD-ROM 
   > Profile: DVD+R/DL 
   > Profile: DVD+RW 
   > Profile: DVD+R 
   > Profile: DVD-R/DL layer jump recording 
   > Profile: DVD-R/DL sequential recording 
   > Profile: DVD-RW restricted overwrite 
   > Profile: DVD-RW sequential recording 
   > Profile: DVD-R sequential recording 
   > Profile: Removable Disk 
   > Profile: DVD-ROM 
   > Profile: CD-RW 
   > Profile: CD-R 
   > Profile: CD-ROM 
   > Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr).
   > Driver flags   : NO-CD BD MMC-3 BURNFREE 
   > Supported modes: PACKET SAO LAYER_JUMP
   > Drive buf size : 2162688 = 2112 KB
   > FIFO size      : 4194304 = 4096 KB
   > Track 01: data  22364 MB         padsize:   30 KB
   > Total size:     22364 MB = 11450708 sectors
   > Current Secsize: 2048
   > Blocks total: 12219392 Blocks current: 12219392 Blocks remaining: 768684
   > Reducing transfer size from 64512 to 32768 bytes.
   > Starting to write CD/DVD/BD at speed 0 in real SAO mode for single session.
   > Last chance to quit, starting real write in 5 seconds
   >  Operation starts.
   > Waiting for reader process to fill input buffer ... input buffer ready.
   > Starting new track at sector: 0
   > 0x
   > Track 01: writing  30 KB of pad data
   > Track 01: Total bytes read/written: 23451019264/23451049984 (11450708 sectors)
   > Writing  time: 2642
   > 701s
   > Average write speed   2
   > 0x
   > Min drive buffer fill was 18
   > Fixating
   > Fixating time:   24
   > 086s
   > /cygdrive/e/Zalohy/BURN/ir053_portable_x64/cdrtools/cdrecord: fifo had 715669 puts and 715669 gets
   > /cygdrive/e/Zalohy/BURN/ir053_portable_x64/cdrtools/cdrecord: fifo was 15 times empty and 123403 times full, min fill was 0
CCore::ProcessEnded
  Process exited with code: 0.
CCore::EjectDisc
  [10,0,0] PIONEER BD-RW   BDR-209D 1.10
  Command line to run: "E:\Zalohy\BURN\ir053_portable_x64\cdrtools\cdrecord.exe" -eject dev=10,0,0
   > scsidev: '10,0,0'
   > scsibus: 10 target: 0 lun: 0
   > /cygdrive/e/Zalohy/BURN/ir053_portable_x64/cdrtools/cdrecord: Warning: The DMA speed test has been skipped
   > Cdrecord-ProDVD-ProBD-Clone 2
   > 01
   > 01a61 (i686-pc-cygwin) Copyright (C) 1995-2009 Jörg Schilling
   > Using libscg version 'schily-0
   > 9'
   > Device type    : Removable CD-ROM
   > Version        : 0
   > Response Format: 2
   > Capabilities   : 
   > Vendor_info    : 'PIONEER '
   > Identifikation : 'BD-RW   BDR-209D'
   > Revision       : '1
   > 10'
   > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM
   > Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr)
   > Driver flags   : NO-CD BD MMC-3 BURNFREE 
   > Supported modes: PACKET SAO LAYER_JUMP
CCore::ProcessEnded
  Process exited with code: 0.

InfraRecorder version 0.53.0.0 (x64)
Started: neděle, července 22 2018 09:58:39.
Versions: MSW = 6.1, IE = 6.1, CC = 6.10.
FileSystemWriter::write
  sector offset: 0.
  Allocated directory entries 2 sectors.
CCore::BurnCompilation
  [10,0,0] PIONEER BD-RW   BDR-209D 1.10
  Eject = 0, Simulate = 0, BUP = 1, Pad tracks = 1, Close = 1, Overburn = 0, Swab = 0, Ignore size = 0, Immed = 0, Audio master = 1, Forcespeed = 0, VariRec (enabled) = 0, VariRec (value) = 0, Data bytes 23922073600.
FileSystemWriter::write
  sector offset: 0.
  sector offset: 0.
   > scsidev: '10,0,0'
   > scsibus: 10 target: 0 lun: 0
   > SCSI buffer size: 64512
   > /cygdrive/e/Zalohy/BURN/ir053_portable_x64/cdrtools/cdrecord: Warning: The DMA speed test has been skipped.
   > Cdrecord-ProDVD-ProBD-Clone 2.01.01a61 (i686-pc-cygwin) Copyright (C) 1995-2009 Jörg Schilling
   > TOC Type: 1 = CD-ROM
   > Using libscg version 'schily-0.9'.
   > Driveropts: 'burnfree'
   > atapi: -1
   > Device type    : Removable CD-ROM
   > Version        : 0
   > Response Format: 2
   > Capabilities   : 
   > Vendor_info    : 'PIONEER '
   > Identifikation : 'BD-RW   BDR-209D'
   > Revision       : '1.10'
   > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
   > Current: BD-R sequential recording
   > Profile: BD-RE 
   > Profile: BD-R random recording 
   > Profile: BD-R sequential recording (current)
   > Profile: BD-ROM 
   > Profile: DVD+R/DL 
   > Profile: DVD+RW 
   > Profile: DVD+R 
   > Profile: DVD-R/DL layer jump recording 
   > Profile: DVD-R/DL sequential recording 
   > Profile: DVD-RW restricted overwrite 
   > Profile: DVD-RW sequential recording 
   > Profile: DVD-R sequential recording 
   > Profile: Removable Disk 
   > Profile: DVD-ROM 
   > Profile: CD-RW 
   > Profile: CD-R 
   > Profile: CD-ROM 
   > Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr).
   > Driver flags   : NO-CD BD MMC-3 BURNFREE 
   > Supported modes: PACKET SAO LAYER_JUMP
   > Drive buf size : 2162688 = 2112 KB
   > FIFO size      : 4194304 = 4096 KB
   > Track 01: data  22813 MB         padsize:   30 KB
   > Total size:     22813 MB = 11680715 sectors
   > Current Secsize: 2048
   > Blocks total: 12219392 Blocks current: 12219392 Blocks remaining: 538677
   > Reducing transfer size from 64512 to 32768 bytes.
  Allocated directory entries 2 sectors.
   > Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session.
   > Last chance to quit, starting real write in 5 seconds
   >  Operation starts.
   > Waiting for reader process to fill input buffer ... input buffer ready.
   > Starting new track at sector: 0
   > 0x
   > Track 01: writing  30 KB of pad data
   > Track 01: Total bytes read/written: 23922073600/23922104320 (11680715 sectors)
   > Writing  time: 1361
   > 857s
   > Average write speed   3
   > 9x
   > Min drive buffer fill was 96
   > Fixating
   > Fixating time:   16
   > 069s
   > /cygdrive/e/Zalohy/BURN/ir053_portable_x64/cdrtools/cdrecord: fifo had 730044 puts and 730044 gets
   > /cygdrive/e/Zalohy/BURN/ir053_portable_x64/cdrtools/cdrecord: fifo was 2 times empty and 54458 times full, min fill was 0
CCore::ProcessEnded
  Process exited with code: 0.
CCore::EjectDisc
  [10,0,0] PIONEER BD-RW   BDR-209D 1.10
  Command line to run: "E:\Zalohy\BURN\ir053_portable_x64\cdrtools\cdrecord.exe" -eject dev=10,0,0
   > scsidev: '10,0,0'
   > scsibus: 10 target: 0 lun: 0
   > /cygdrive/e/Zalohy/BURN/ir053_portable_x64/cdrtools/cdrecord: Warning: The DMA speed test has been skipped
   > Cdrecord-ProDVD-ProBD-Clone 2
   > 01
   > 01a61 (i686-pc-cygwin) Copyright (C) 1995-2009 Jörg Schilling
   > Using libscg version 'schily-0
   > 9'
   > Device type    : Removable CD-ROM
   > Version        : 0
   > Response Format: 2
   > Capabilities   : 
   > Vendor_info    : 'PIONEER '
   > Identifikation : 'BD-RW   BDR-209D'
   > Revision       : '1
   > 10'
   > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM
   > Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr)
   > Driver flags   : NO-CD BD MMC-3 BURNFREE 
   > Supported modes: PACKET SAO LAYER_JUMP
CCore::ProcessEnded
  Process exited with code: 0.

InfraRecorder version 0.53.0.0 (x64)
Started: neděle, července 22 2018 14:12:35.
Versions: MSW = 6.1, IE = 6.1, CC = 6.10.
FileSystemWriter::write
  sector offset: 0.
  Allocated directory entries 59 sectors.
CCore::BurnCompilation
  [10,0,0] PIONEER BD-RW   BDR-209D 1.10
  Eject = 0, Simulate = 0, BUP = 1, Pad tracks = 1, Close = 1, Overburn = 0, Swab = 0, Ignore size = 0, Immed = 0, Audio master = 1, Forcespeed = 0, VariRec (enabled) = 0, VariRec (value) = 0, Data bytes 23234590720.
FileSystemWriter::write
FileSystemWriter::write
  sector offset: 0.
   > scsidev: '10,0,0'
   > scsibus: 10 target: 0 lun: 0
   > SCSI buffer size: 64512
   > /cygdrive/e/Zalohy/BURN/ir053_portable_x64/cdrtools/cdrecord: Warning: The DMA speed test has been skipped.
   > Cdrecord-ProDVD-ProBD-Clone 2.01.01a61 (i686-pc-cygwin) Copyright (C) 1995-2009 Jörg Schilling
   > TOC Type: 1 = CD-ROM
   > Using libscg version 'schily-0.9'.
   > Driveropts: 'burnfree'
   > atapi: -1
   > Device type    : Removable CD-ROM
   > Version        : 0
   > Response Format: 2
   > Capabilities   : 
   > Vendor_info    : 'PIONEER '
   > Identifikation : 'BD-RW   BDR-209D'
   > Revision       : '1.10'
   > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
   > Current: BD-R sequential recording
   > Profile: BD-RE 
   > Profile: BD-R random recording 
   > Profile: BD-R sequential recording (current)
   > Profile: BD-ROM 
   > Profile: DVD+R/DL 
   > Profile: DVD+RW 
   > Profile: DVD+R 
   > Profile: DVD-R/DL layer jump recording 
   > Profile: DVD-R/DL sequential recording 
   > Profile: DVD-RW restricted overwrite 
   > Profile: DVD-RW sequential recording 
   > Profile: DVD-R sequential recording 
   > Profile: Removable Disk 
   > Profile: DVD-ROM 
   > Profile: CD-RW 
   > Profile: CD-R 
   > Profile: CD-ROM 
   > Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr).
   > Driver flags   : NO-CD BD MMC-3 BURNFREE 
   > Supported modes: PACKET SAO LAYER_JUMP
   > Drive buf size : 2162688 = 2112 KB
   > FIFO size      : 4194304 = 4096 KB
   > /cygdrive/e/Zalohy/BURN/ir053_portable_x64/cdrtools/cdrecord: Drive does not support TAO recording.
   > /cygdrive/e/Zalohy/BURN/ir053_portable_x64/cdrtools/cdrecord: Illegal write mode for this drive.
CCore::ProcessEnded
  Process exited with code: 255.
  Allocated directory entries 59 sectors.